Remotec ZXT-310 V1.2 Bedienungsanleitung PDF herunterladen (Seite 22)

direction. Find the direction providing the best reception by

adjusting the antenna direction before mounting the ZXT-310.

Note 2: No screws are provided for mounting to a wall.

Note 3: Before mounting to a wall, be sure to fully read the precautions.



1. Obtaintwoscrewssuitableforthewallstrengthandmaterial.

Thescrewsizeisshowninthefigurebelow.



2. ThepositionalrelationshipbetweentheZXT‐310keyholesand

thescrewmountingpositionsareshowninthefigurebelow.

Note 1: When mounting the screws to the wall, leave a space

between the wall and screw cap as shown in the figure.



3. InserttheZXT‐310keyholesontothetwoscrewsmountedto

thewall,andthenslidedownwardtosecureinplace.



4. AftersecuringtheZXT‐310tothewall,connecttheAC/DC

adaptorandcablestotheZXT‐310.

Note 1: Check that the ZXT-310 is firmly secured to the wall.

Note 2: Insert the AC/DC adaptor and IR emitter cable so that

they are firmly connected to the ZXT-310.

5. WhenremovingtheZXT‐310fromthewall,liftuptheZXT‐310,

thenpullittowardsyou.



1 2 ... 17 18 19 20 21 22 23 24 25 26 27

Keine Kommentare

Remotec ZXT-310 V1.2 Bedienungsanleitung Seite 22