Remotec Z-URC 550EU Betriebsanleitung PDF herunterladen (Seite 2)

2 3

KEY FUNCTION DESCRIPTIONS

1. Turns on or turns off all Z-Wave devices in the device database.

2. On and off switches for the different Z-Wave groups and scenes.

3. Press once to access secondary functions for the next button.

Press and hold to activate shift lock for permanent use of shift

functions. Press shift again to release shift lock.

Note: The shift key allows you access group's shift 1 through

shift 8 giving you a total of 16 groups.

4. The ADD and REMOVE keys are used for the XpressZetup

process.

ADD will perform 2 functions:

(1) Add the device to network also known as inclusion.

(2) Add the device to the assigned group.

REMOVE will only remove the device from its assigned group

but not exclude it from the network.

5. This shift key is used for accessing group numbers 9 to 16 while

programming your devices.

6. These are your group numbers 1 through 8 and also become

group numbers 9 through 16 when combined with the shift key.

7. The configuration key is used during the advanced setup

process.

8. Assoc is used in conjunction with Add, Delete and Remove to

set up association groups.

9. Device is used in conjunction with Add and Delete to include or

exclude devices to the network.

10. Scene is used in conjunction with Add, Delete and Remove to

set up scenes.

11. The Add key is used in the advanced set to up to:

- Add to a network (inclusion).

- Add to an association group.

- Add to a scene.

12. The Delete key is used in the advanced set up to:

- Delete a device from a network (exclusion).

- Delete an association group.

- Delete a scene.

13. The Remove key is used in the advanced set up to:

- Remove a device from association group.

- Remove a device from a scene.

ALL

OFF

SHIFT

3xAAA batteries are required for operation.

Welcome to the world of home automation, your Z-URC will be able to

control all the Z-Wave products around your house. The following section will

guide you through the set up processes for your Z-URC .

Firstly there is the XpressZetup for beginner users that do not have a large

amount of Z-Wave products. Following is the advanced set up that you will

need to become familiar with as your Z-Wave network of products continues

to expand. Please note that all devices, lights and nodes made from different

vendors are compatible with your Z-URC as long as the carry the Z-Wave

logo.

Please carefully read through the following then store the manual for future

reference.

1. Remove the battery cover on the back of your Z-URC .

2. Check the polarity of the batteries and the "+/-" marks inside the battery

compartment.

3. Insert the batteries.

4. Push the battery cover back in place.

HOW TO INSTALL THE BATTERIES

SETUP THE Z-URC FOR RF EQUIPMENT

- Use new batteries of the recommended type and size only.

- Never mix old and new batteries together.

- To help avoid the chance of chemical leaks remove the batteries from the

remote if you do not intend to use the remote for an extended period of

time.

- Dispose of old batteries properly do not burn or bury them.

CAUTION (Battery safety)

ADD

REMOVE

SHIFT

Assoc

Scene

Device

Add

Delete

Remove

Conf

GBGB

1 2 3 4 5 6 7 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Remotec Z-URC 550EU Betriebsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fernbedienungen Remotec Z-URC 550EU