Remotec Multimedia Master Remote Betriebsanweisung PDF herunterladen (Seite 15)

Cytavision installation guide • chapter 4 - remote control

Insertion of the batteries

The remote control uses two AAA (LR03) batteries,

which are included in the package. Whenever you insert

batteries, always make sure both of them are new.

To insert the batteries:

1.Onthebackoftheremotecontrolremovethe

batterycompartmentcoverbypressingonthecatch

andpullingthecoverdown.

2. Insert the batteries, making sure that they are properly

oriented with the positive (+) and negative (-) ends

as specified on the battery compartment labels.

3. Assemblethebatterycompartmentcover.



There is a risk of explosion if a battery is damaged

or replaced by an incorrect type. Dispose of used

batteries properly (see “information for the consumers

on batteries end of life” in chapter 6 - Product notes).

Donotdisassemble,crush,punctureorincineratethe

battery.Onlydischargedbatteriesshouldbedisposed

of.Donotshort-circuit.

4.1 How it works

This Remote control is designed to control both the Set

Top Box and the TV and therefore works in two modes:

• Set-TopBox(STB):STBkeypressedandblinksupona

keyentrywheninthismode

• TVmode:TVkeypressedandblinksuponakeyentry

wheninthismode

To navigate through the Cytavision menus the STB

mode must be selected (see separate Service User

Guide).

When in TV mode this Remote Control can manage

the following TV functions:

• PowerON/OFF  

• Numberkeys(0-9)  

• Program(up/down) 

•Volume(up/down)  

• Mute   

•AVkey    

•OKandarrowkeys 

•Specialfunctionkeys   

  (red,green,yellow, blue)

4.2 Programming procedures for Remote

Control to control the TV set

There are programming procedures that make it

possible to control the TV set with the STB remote

control as described in the following sections 4.2.1 and

4.2.2.

The programmed code is retained during batteries

change.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 38 39

Kommentare zu diesen Handbüchern

Keine Kommentare

Remotec Multimedia Master Remote Betriebsanweisung Seite 15

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Remotec Multimedia Master Remote